使用外部液晶屏导航Edge Standard v3/v2

要进入 Genesys Cloud Edge 标准版 v3 /v2 外置 LCD 菜单，请按向右箭头。 LCD 面板显示 系统 和导航图标。

LCD 面板可以在每个子菜单中显示以下子菜单和项目。

注意： 您无法在 Edge 液晶屏上配置 IPv6。

注意： 要将 Edge 日志导出到 USB 存储器，请使用液晶屏菜单路径 诊断 > 将今天的日志复制到 E:。 当 Edge 处于离线状态时，使用此选项下载 Edge 日志以获得支持。

状态菜单

System
   Pairing Id
   Id
   Hostname
   Model
   Serial Number
   Factory Image
   File Version
   Machine Uptime
Network
   Port 1 (Wan)
      Description
      Physical Address
      DHCP Enabled
      Address ← IPv6
      Address ← IPv6 link local
      Address ← IPv4
      Gateway ← IPv6
      Gateway ← IPv4
      DNS ← IPv6
      DNS ← IPv4
   Port 2 
      Media State
      Description
      Physical Address
      DHCP Enabled
  Port 3 
      Media State
      Description
      Physical Address
      DHCP Enabled
  Port 4 
      Media State
      Description
      Physical Address
      DHCP Enabled
   Baseboard Mgmt 1 
      Media State
      Description
      Physical Address
      DHCP Enabled

设置菜单

Settings
   Region
      Auto-select
      Asia Pacific (Japan)
      Asia Pacific (Sydney)
      European Union (Ireland)
      US East (N. Virginia)
   System
      LCD Contrast
      LCD Brightness
      Reboot Server
      WAN Monitor
   Network
      Proxy
      Port 1 (Wan)...2-7
         Set DHCPv4
         Set Static IPv4
     Port 2 
      Set DHCPv4
      Set Static IPv4
    Port 3
      Set DHCPv4
      Set Static IPv4
    Port 4
      Set DHCPv4
      Set Static IPv4
    Baseboard Mgmt 1 
      Set DHCPv4
      Set Static IPv4
Diagnostics 
   Media State 
     Port 1 (Wan)…2-7
     Port 2
     Port 3
     Port 4
     Baseboard Mgmt 1 
  Ping Gateway ← Port 1 (Wan)…2-7 
  Ping Internet ← WAN only 
  DNS Lookup ← WAN only 
  Ping DNS ← All 
  Copy Todays Logs to E: 
Setup Wizard 
  Proxy 
  Port 1 (Wan) 
     Set DHCPv4 
     Set Static IPv4
Factory Service 
     Server Details 
     Factory Restore 
     Reboot BMC 
     Unpair with Genesys Cloud
     Certificate Restore
	 	Most Recent
		Backup

注意： 修改任何设置时，Genesys Cloud Edge LCD 面板会提示您 应用更改。 确保按下相应的液晶屏面板按钮以确认这些更改。 按下与 X 关联的按钮 将取消您的更改。